Tutorial

Print your first strip

Run one complete customer session in Free Play Mode, from the welcome screen to a printed strip, then put the kiosk back into Coin Operated mode. About five minutes.

A test session proves that the camera, the printer, and the paper and ribbon all work before a paying customer finds out otherwise. Free Play Mode skips the payment screen, so the test needs no cash or card.

What you need

  • The three earlier tutorials done: the kiosk on Wi-Fi, activated, and signed in with your own password.
  • The printer loaded with paper and ribbon.

1. Switch the kiosk to Free Play Mode

  1. Open the admin area: five taps in the top-right corner of the welcome screen, then sign in.
  2. Open Products. Under Photobooth Mode, choose Free Play Mode.
  3. Tap Save Configuration. The bar at the top of the admin area now reads "Free Mode" after "Mode:".
  4. Tap Exit Admin.

2. Run a session

Every customer screen has a timeout and goes back to the welcome screen when it runs out, so keep going once you start. Most screens allow sixty seconds.

  1. On the welcome screen, tap Tap to Begin.
  2. On "Select Style", tap Strips.
  3. On "Tap to select design", tap any design, then tap Continue to payment. In Free Play Mode the payment screen is skipped: the kiosk shows "You're all set. Time for your photo session!" for a few seconds and goes on by itself.
  4. "Get ready for your first photo!" means the camera is about to fire. Look at the camera and follow the countdown for each photo; the kiosk says "Looks great!" between photos.
  5. On "Your Photo is Ready!", tap Looks Good!. (Retake takes the photos again, and Add Filter opens the filter screen; neither is needed for the test.)
  6. On "Extra prints?", tap No thank you.
  7. The kiosk prints. The screen says "Pickup your prints outside". Take the strip, then tap Start new session; the kiosk also returns to the welcome screen by itself after thirty seconds.
If the design screen says there are no templates

"No templates available" means nothing is on the kiosk yet. Follow Put a template on a booth first, then come back to step 2.

3. Check the strip

  • Each photo sits inside the design's windows, with the artwork over it.
  • Colours look like they did on the screen.
  • If the screen said "Printer is offline. Please check the printer." instead of printing, check the printer's power and cable, then tap Retry printing. The kiosk tries three times on its own before it gives up.

4. Put the kiosk back into Coin Operated mode

Free Play Mode records every session as free, so do not leave a public kiosk in it by accident.

  1. Open the admin area and open Products.
  2. Under Photobooth Mode, choose Coin Operated, then tap Save Configuration.
  3. Tap Exit Admin.

The test session stays in the kiosk's records as a free session, under Sales & Analytics.

Where to go next

The kiosk is ready for customers. The how-tos under Operate your booth cover what comes next:

Last verified against the software on 2026-10-20.