How-to guide

Set your business name and logo

Put your name on the welcome screen and your logo on prints, from the kiosk for one booth or from the web dashboard for all of them.

Two things carry your brand: the name on the welcome screen, and the logo printed on the strip wherever the template leaves room for one. Each booth keeps its own copy of both. You can set them on the kiosk, or set them once on the web and let the booth take them from the cloud.

On the kiosk

  1. In the admin area, open Settings. The first card is Business Information.
  2. Fill in Booth Name, Display Name, and Location. The display name is what the welcome screen shows. Clear it to show no name; a booth that never had one shows BoothIQ. The booth name is the booth's identifier in the app and on the web; customers never see it.
  3. For a logo, tap Upload Logo. The picker browses a USB drive only. Pick a PNG or JPG, then tap Use this logo. The toast reminds you that the logo applies when you save.
  4. Show logo on prints decides whether the logo is printed.
  5. Tap Save Settings at the top right. The toast reads "Settings Updated".

The logo prints where the template has a logo area, which is set per template in the kiosk's template editor. A template without one prints no logo.

Sync from cloud

The Sync from cloud switch on the same card hands the business information to the web dashboard. While it is on, the booth accepts the name, display name, and logo the cloud sends; while it is off, the booth ignores them, so what you entered here stays. If the dashboard's Use Business Name on All Booths is on, the display name field is replaced by the business name and the note "Business name is managed from cloud dashboard".

On the web, for every booth

In the dashboard, open Settings, then Business Settings on the Business Branding card.

With All Booths selected:

  • Business Name is your account's name.
  • Use Business Name on All Booths makes every booth show the business name on its welcome screen instead of its own display name. It takes effect once a business name is saved; with the field blank, each booth keeps showing its own display name.
  • Account Logo is the default logo for every booth. Upload a PNG or JPG up to 5 MB, or Remove it.

With one booth selected, the same dialog adds that booth's own fields: Booth Name, Display Name (not editable while the business name is used on all booths), Address, and Booth Logo, which overrides the account logo for that booth only. The display name field is empty both for a booth that never had a name (its welcome screen shows BoothIQ) and for one whose name was cleared (its welcome screen shows no name); the note under the field says which. To show no name, clear the field and save. A booth that never had a name has nothing to clear, so save a name first, then open the dialog again, clear the field, and save.

Click Save Changes for the business name, booth name, display name, and address. The Use Business Name on All Booths switch and the logo Upload and Remove buttons save as soon as you use them, so if you changed only those there is nothing left to save. A kiosk with Sync from cloud on picks the changes up on its next heartbeat. A kiosk with it off keeps its own values.

Verify it worked

  • The welcome screen shows the display name, the business name when it is used on all booths, BoothIQ when no name was ever set, or no name when you cleared it.
  • In Free Play, print a strip with a template that has a logo area: the logo is on it. The steps are in Print your first strip.

Last verified against the software on 2026-10-21.