Tutorial

Set up the kiosk for the first time

Take a kiosk from its powered-on welcome screen to one that is on the internet, with your own password and recovery PIN on the main account and the second factory account removed. About fifteen minutes.

This is the first of four tutorials. At the end of it the kiosk is connected to the venue's Wi-Fi, the main factory sign-in has been replaced by a password you chose with a recovery PIN, and the second factory account is gone. It takes about fifteen minutes and nothing in it needs the BoothIQ app or an account yet.

What you need

  • The kiosk, switched on and showing its welcome screen: the word "Welcome", a large "Tap to Begin" circle, and a pulsing Unlicensed badge in the bottom-right corner. The badge is expected; a later tutorial removes it.
  • The name and password of the venue's Wi-Fi network.
  • The kiosk's factory username and password for its main account. The kiosk ships with two factory accounts; this tutorial replaces the main one's password and removes the other.

1. Connect the kiosk to Wi-Fi

The welcome screen has an unmarked Wi-Fi zone in its bottom-right corner, where the Unlicensed badge also sits; the zone reaches higher than the badge does. It needs no sign-in.

  1. Tap the bottom-right corner of the welcome screen three times, higher than the badge. If the activation dialog opens instead, the tap landed on the badge: close the dialog with the cross in its top-right corner and tap a little higher.
  2. The Wi-Fi panel opens and lists the networks it finds. Tap Connect next to the venue's network. If the list is empty, tap Scan.
  3. In the "Connect to WiFi" dialog, enter the network Password and tap Connect.

The panel shows "Connected to" followed by the network name. Close the panel with its cross.

Networks that ask for a username

A network that needs a username as well as a password (enterprise Wi-Fi) cannot be used. The kiosk answers "Enterprise WiFi networks are not supported". Use a network with a plain password for the rest of this tutorial.

2. Open the admin area

  1. Tap the top-right corner of the welcome screen five times, each tap within three seconds of the last. The corner is not marked either.
  2. The "Admin Access" screen appears. Enter the factory Username and Password, then tap Sign In.

3. Choose your own password

Because you signed in with the factory details, the kiosk shows "Security Setup Required" before anything else and does not go on until the password is changed.

  1. Enter a password in New Password. The kiosk accepts anything typed the same way twice, so the choice is yours: a long passphrase of several words is the safest, and the easiest to type on the screen. Why length matters is on Protecting the admin area.
  2. Enter the same password in Confirm New Password.
  3. Tap Change Password and Continue.

4. Set a recovery PIN

The kiosk now shows "Set Recovery PIN". The PIN is the only way to reset a forgotten password on the kiosk itself: the "Forgot your password?" link on the sign-in screen asks for it.

  1. Enter a four-digit PIN.
  2. Tap Continue.

The admin area opens, with a "Master Access" badge at the top for this account. Write the password and the PIN down and keep them somewhere other than the kiosk.

5. Remove the second factory account

The kiosk ships with a second factory account meant for staff. It still has its factory password, which anyone who has read the kiosk's documentation knows, and it can change prices and add credits. Remove it now; staff accounts of your own can be added later in the same place with Add User.

  1. Open Settings, then Security & Users.
  2. Under User Management, find the second account in Existing Users: the one that is not yours, marked with the access level "User". If there is no User Management section, the badge at the top reads "User Access": you signed in with the staff account, and this step needs the main account's factory details instead.
  3. Tap the bin icon on its row. The kiosk asks "Are you sure you want to delete" it; tap Delete.

The row disappears. The kiosk refuses to delete the account you are signed in with, so your own cannot go by mistake.

If you want a second account right away

Instead of deleting it, tap Exit Admin, open the admin area again and sign in with the second account's factory username and password. The kiosk takes that account through the same password change and recovery PIN as steps 3 and 4. Either way, no account is left on a factory password.

6. Leave the admin area

Tap Exit Admin. The welcome screen is back, still with its Unlicensed badge, which is what the next two tutorials deal with.

What you have now

  • The kiosk is on the venue's Wi-Fi. It keeps the network and reconnects by itself after a restart.
  • Neither factory sign-in works any more: the main account has your password, and the second account is deleted (or has its own password and PIN, if you kept it).
  • A recovery PIN is set for your username.

The next tutorial is Create your account and add a booth.

Last verified against the software on 2026-10-25.