How-to guide
Change the Wi-Fi network
Move a kiosk to a different wireless network from the admin area, or from the welcome screen without signing in.
The kiosk remembers the networks it has joined and reconnects by itself after a restart. Changing to a new network takes one tab in the admin area. Nothing about the booth's cloud link changes; it carries on as soon as the new connection is up.
Before you start
- The name and password of the new network. A network that asks for a username as well (enterprise Wi-Fi) is refused with "Enterprise WiFi networks are not supported".
- The kiosk's admin login, or use the route without one at the end.
Join a different network
- Open the admin area and open WiFi. The tab shows the adapter, the current network, and the connection status.
- Under Available Networks, tap Connect next to the new network. If the list is empty or stale, tap Scan Networks first.
- In the "Connect to WiFi" dialog, enter the Password and tap Connect.
The status changes to "Connected" and the current network shows the new name. The old network stays saved.
To leave the current network without joining another, tap Disconnect.
Without signing in
The welcome screen opens the same connection panel without a login: tap its bottom-right corner three times, higher than the Unlicensed badge if one is showing. The panel scans by itself; tap Connect next to the network and enter its password. The steps are in Set up the kiosk for the first time.
Verify it worked
- The WiFi tab's Status reads "Connected" and Current Network shows the new name.
- If the booth is activated, open the BoothIQ app and pull down on the booths list: the booth's card goes back to Online within a minute of the new network reaching the internet, because the kiosk sends a heartbeat every thirty seconds once it is connected. A network that joins but has no internet (a captive portal, or a router with no internet connection) keeps the booth offline in the app. The Cloud Sync tab's badge shows whether the booth is linked, not whether it is online, so it does not change.
Last verified against the software on 2026-10-20.